天津市空调服务公司

空调使用中的八个实用常识

Eight Practical Common Senses in the Use of Air Conditioning

（一）、注意线路安全:应具备适合的用电容量和可靠的专线连接，并具可靠的接地线。

(1) Pay attention to the safety of the line: It should be equipped with suitable power consumption capacity, reliable dedicated line connection and reliable grounding line.

（二）、注意细心调节室温: 制冷时室温定高1℃、制热时室温定低2℃、均可节省 10% 以上，而人体几乎觉察不到温度的差别。

(2) Attention should be paid to carefully adjusting the room temperature: when refrigerating, the room temperature should be set at a high temperature, while when heating, the room temperature should be set at a low temperature, which can save more than 10%, while the human body can hardly detect the difference in temperature.

（三）、定期清扫滤清器:灰尘会堵塞滤清器网眼，降低冷暖气效果，应半月左右清扫一次。 尽量少开门窗、使用厚质、透光少的窗帘可以减少房内外热量交换，利于省电。

(3) Regular cleaning filter: Dust will clog the filter mesh, reduce the effect of heating and cooling, should be cleaned about half a month. Minimizing the opening of doors and windows, using thick curtains with less light transmission can reduce the heat exchange inside and outside the room, which is conducive to saving electricity.

（四）、勿挡住室外机的出风口:否则也会降低冷暖气效果，浪费电力。

(4) Do not block the outlet of the outdoor machine: otherwise, it will reduce the heating and cooling effect and waste electricity.

（五）、选择适宜出风角度:冷气流比空气重，易下沉，暖气流则相反。所以制冷时出风口向上，制热时则向下，调温效率大大提高。

(5) Choose an appropriate outlet angle: the cold air is heavier than the air, and sinks easily, while the warm air is the opposite. Therefore, when refrigerating, the outlet is upward, while when heating, it is downward, which greatly improves the efficiency of temperature regulation.

（六）、控制好开机和使聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛 用中的状态设定:开机时，设置高冷 / 高热，以最快达到控制目的;当温度适宜时，改中、低风，减少能耗，降低噪音。